Tentative Schedule for 2025:

Registration for the summer school will take place in Room 205 in Building 349 on Wednesday morning, May 14 from 8.00 to 8.30 before the first lecture.

You can find at map of DTU at the web-page:
https://www.dtu.dk/english/-/media/dtudk/om_dtu/besoeg-dtu/letbanekort/map_-dtu-lyngby-campus-traffic-diversion-24-09-24.pdf. Please note that there is a lot of construction going on at DTU over the entire campus, so this map can change with short notice. Hopefully you can find you way around, but plan to be in good time. Directions on how to get to DTU can be found: here.

The lecture slides can be downloaded by clicking on the link for the lecture or they can be found at Lecture Slides

Day	From 8.00 to 10.00	From 10.00 to 12.00	From 12.00 to 13.00	From 13.00 to 15.00	From 15.00 to 17.00	Evening from 19.00
Wednesday, May 14	Welcome to the summer school (JAJ) Introduction to Field II (JAJ)	Introduction to Field II (cont) (JAJ)	Lunch	Exercise on field II (LEH+MTB)	Synthetic aperture imaging (JAJ)	Welcome Dinner at Kongekilden
Thursday, May 15	Beamforming theory (LTJ) Beamforming optimization (SEBKA)	Exercise on beamforming (LTJ+SEBKA)	Lunch	Research scanners (BT)	Exercise on acquisition of SA data using cfu_scan and Verasonics scanners (BT+BY)	Free
Friday, May 16	Blood flow in the human body and its modeling (BY)	Flow estimation and imaging (JAJ)	Lunch	Vector flow imaging methods (JAJ) Synthetic aperture flow imaging (JAJ)	Exercise on velocity estimation (BY+LEH) Selection of student projects and forming of groups	Dinner in Nyhavn in Copenhagen
Monday, May 19	Super resolution imaging (IT) Super resolution imaging without contrast agents (MAN)	Exercise on super resolution processing (IT+MAN)	Lunch	Designing and simulating a CMUT probe (EVT)	Period for work on project	Free
Tuesday, May 20	Row-column probes (LTJ)	Exercise on beamforming row-column data (LTJ+SEBKA)	Lunch	Exercise on simulating a CMUT probe (EVT)	Period for work on project	Free
Wednesday, May 21	Acquisition of data for projects on flow and B-mode imaging or Project work	Acquisition of data for projects on super resolution and row-column imaging or Project work	Lunch	Period for work on project	Period for work on project	Dinner at Llama in Copenhagen
Thursday, May 122	Period for work on project	Period for work on project	Lunch	Period for work on project	Period for work on project	Free
Friday, May 23	Preparation for presentations	Prepatation for presentations	Lunch	Presentation and discussion of student projects (All), 20 min/group	Presentation and discussion of student projects (All), 20 min/group	Dinner in Tivoli Garden in Copenhagen

Teachers:

JAJ: Jørgen Arendt Jensen, Ph.D., Dr. Techn.
Professor of Biomedical Engineering
Center for fast Ultrasound Imaging
Department of Health Technology
Technical University of Denmark
E-mail: jaje@dtu.dk

EVT: Erik Vilain Thomsen, Ph.D.
Professor of Nanotechnology,
Department of Health Technology
Technical University of Denmark
E-mail: ervt@dtu.dk

BT: Borislav Tomov, PhD
Associate Professor
Center for fast Ultrasound Imaging
Department of Health Technology
Technical University of Denmark
E-mail: bgto@dtu.dk

BY: Billy Yiu, Ph.D.
Associate Professor
Department of Health Technology
Technical University of Denmark
E-mail: yshyi@dtu.dk

LTJ: Lasse Thurmann Jørgensen, PhD
Postdoctoral Fellow
Center for fast Ultrasound Imaging
Department of Health Technology
Technical University of Denmark
E-mail: latjo@dtu.dk

MAN: Mostafa Amin Naji
PhD student
Center for fast Ultrasound Imaging
Department of Health Technology
Technical University of Denmark
E-mail: mamna@dtu.dk

SEBKA: Sebastian Kazmarek Præsius
PhD student
Center for fast Ultrasound Imaging
Department of Health Technology
Technical University of Denmark
E-mail: sebka@dtu.dk

Places:

All the lectures will take place in Room 205 in Building 349.

Lunch will be served in Building 342 as a buffet lunch. Please remember the lunch tickets you get on the first day at the registration.

All the computer exercises will take place in Room 205 on the top floor in Building 349. Scans with the Verasonics scanners will take place on the top floor in building 349.